Settings

There are 5 different settings that can be set.

Rotary values

Rotary tells us which measurement is selected on MFT using rotary selector.

Value	Description
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_ROTARY_INSULATION`	Insulation measurement is selected
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_ROTARY_CONTINUITY`	Continuity measurement is selected
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_ROTARY_LINE_NO_TRIP`	Line no trip measurement is selected
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_ROTARY_NA`	None of the above measurements is selected

Possible values for the F1 setting.

Value	Description
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F1_LN`	Measurement between `L` and `N` sockets
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F1_LPE`	Measurement between `L` and `PE` sockets
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F1_NPE`	Measurement between `N` and `PE` sockets
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F1_NA`	`F1` is set to none of the above

Possible values for the F2 setting.

Value	Description
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F2_ZEROED`	The result value had been zeroed already
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F2_NA`	`F2` is set to none of the above

Possible values for the F3 setting.

Value	Description
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F3_PRETEST_OFF`
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F3_PRETEST_OHM_PLUS_MINUS`
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F3_Z_MAX_OFF`
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F3_NA`	`F3` is set to none of the above

Possible values for the F4 setting.

Value	Description
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F4_MA250`
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F4_V500`
`C_SETTINGS_GLOBAL_SETT_VAL_MFT_F4_NA`	`F4` is set to none of the above